Home | Battery Chargers | SBC-1210-M 12V / 10.0 Amperes 4 Stage 90-305 Vac Battery Charger

SBC-1210-M SMART BATTERY CHARGER

SBC-1210-M series are state of the art battery chargers featuring very high efficiency and low cost in a compact metallic casing. Chargers are designed to withstand high levels of disturbances found in the harsh automotive environment. Chargers are practically impossible to destroy, having overload, short circuit, high temperature and reverse battery protections. The overload protection is current limiting type, not hiccup. Hiccup protected chargers will turn-off in case of overload and will be incapable of charging an empty battery with their rated current. In case of a short circuit or overload condition, the SBC-1210-M charger does not shut-off and delivers simply the rated current, allowing a full-speed charge of an empty battery. In case of overheating, the charger will automatically reduce its output current and continue normal operation. SBC chargers have universal input voltage range, enabling the use in all countries with nominal voltages ranging from 110VAC to 277VAC. The nominal output is fully available at all 90-305VAC range without derating.

Read More...

Chargers offer green mode of operation. The green mode consists on reducing the operating frequency when the load decreases. Thus, chargers reduce their losses helping protection of the environment. At very small loads, they enter into a burst mode to reduce the consumption further. Chargers feature very low power consumption at no-load mode, helping again the protection of the environment. The peak efficiency of chargers exceeds 90%, resulting in lower long-term operational costs. As an example, compared to a 12V/10A charger of 80% efficiency, with 30% average load and 20 years of operational life, SBC-1210-M will consume 1000 kW-hour less electrical energy. This means approximately to 100 USD less energy expense per charger. The rectifier fail output is capable of driving a relay or transmitting the operational status to a control module which will give an alarm in case of failure.

Very high efficieny, up to 90% (see charts)

Wide operating voltage range (90-305VAC)

Reverse battery connection protected

LED status indicator

Low power consumption at zero-load

Green mode operation

Output short circuit and overload protection

High temperature protection

Up to 4 stage charging with smart control

Easy to use, DIP switch selections

Battery life extending regenerative charging

Two, three or four stage charging selections

Supports lead-acid, Li-Ion and NiCd batteries

Rectifier fail output

Analog 0-5V current measuring output

Wide operating temperature range

Low output ripple & noise

Low line and load regulations

Small dimensions

Low weight

Product Brochure

LVD Certificate

 

Similar Products